Welded to bottom of a column or post to allow fixing to a foundation or concrete pad.Normal practise to allow a gap to the underside for dry packing / grout.
Bolted at intersection with one beam notched with a welded end plate – where beams are different depths these can be flush top or bottom to suit your site requirements
A beam end cut to match the pitch of a roof timbers.
Can be fixed to either one or both sides of a beam, used to support metal decking or pre-cast concrete floor planks.
Supplied either loose or welded to beam to spread load bearing at each end.
A pair of beams joined together used where height may be restricted. Beams are bolted together with either tubular or PFC spacers.
A splice for connecting two lengths of steel to aid carrying / installation. This is not a full splice and will have to be agreed with an Engineer.
Bolted at intersection with end plates, possibly with a stiffener plate behind – where beams are different depths these can be flush top or bottom to suit your site requirements.
Used to split beams into shorter more manageable sizes, can be used with HSFG bolts.
Simply drilled with slotted holes for connection to brickwork or concrete.